Licensed & Insured, in Allentown and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Allentown
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (610) 600-9879 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Allentown and surrounding areas · On-site visits included · Free estimate within 24h
Allentown Metal Roofing is a team of local certified professionals based in Allentown. We respond quickly in Allentown and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (610) 600-9879⭐⭐⭐⭐⭐ 4.9/5 · 282 verified Google reviews
“Our old stone barn had a rusted-through roof and we figured nobody would touch it. Allentown Metal Roofing took on the whole thing, about 3,000 square feet of corrugated panel, and finished in four days. The crew even swept the hayloft clean before they left. Genuinely relieved.”
Commercial & Agricultural Metal Roofing
“Had a copper bay window roof put on our brick house and it looks incredible, the seams are perfectly straight and the patina is already starting. Took a little longer than quoted, but the craftsmanship was worth the wait.”
Copper & Specialty Metal Roofing
“Replaced the failing roof on our rustic barn with new ribbed panels and the difference is night and day. No more leaks over the stalls, and they hauled away every scrap of the old metal. Solid work from start to finish.”
Metal Roof Replacement
“They installed snow guards on our metal roof after last winter's avalanches nearly took out the front walk. Small job, but they treated it like it mattered and explained exactly where each guard would go. Should've done this years ago.”
Snow Guards & Ice Protection
“New gutters hung on our brick colonial to handle the runoff from the metal roof, clean lines, matched the trim perfectly, and they tested the flow with a hose before packing up. Impressed with the attention to detail.”
Gutters for Metal Roofs
“Full tear-off and standing seam install on our brick house, roughly 2,200 square feet. Crew of five knocked it out in three days and you couldn't find a single stray screw in the yard afterward. The house looks brand new.”
Standing Seam Metal Roofing
“After a bad ice dam season on our metal roof, they came out and set up proper ice protection along the eaves. Fair price and honest about what we actually needed versus what we thought we needed. Grateful for that.”
Snow Guards & Ice Protection
“We went with the retrofit over our existing shingles on the Tudor-style house, worried it would look bulky, but the stone-coated steel panels look fantastic and saved us a full tear-off. Neighbors keep asking who did it.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Allentown · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes tear-off, underlayment and basic trim; price rises with pitch and deck repairs. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and custom trim; higher pitch and dormers push the rate up. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Profile and color choice affect material cost; complex roof geometry adds labor. |
| Complex or historic home installation | On estimate | Mansards, dormers and historic review require an on-site look before pricing. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, standard residential pitch | Starting at $10/sq ft | Includes panels, clips, underlayment, and trim on an accessible roof with a simple layout |
| Slate-look standing seam | Starting at $14/sq ft | Textured finish and profile for Victorian and Tudor homes, priced higher for material and detail work |
| Complex roof with dormers and valleys | On estimate | Dormers, chimneys, skylights, and multiple valleys add trim and flashing time that needs a site visit |
| Tear-off and deck repair | Quoted per layer | Removing old shingles and replacing soft sheathing is priced by the square and the extent of damage |
| Travel | Included | In Allentown and the surrounding Lehigh Valley, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (610) 600-9879, with no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and basic panel replacement | Starting at $9/sq ft | Includes tear-off, disposal, decking inspection, underlayment, and new metal panels installed. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and longer panels raise material and labor cost per square foot. |
| Metal shingle or stone-coated steel replacement | Starting at $12/sq ft | Shingle-profile systems cost more in material and detail work around valleys and hips. |
| Copper or specialty metal replacement | On estimate | Copper pricing tracks metal markets and soldered seam work needs an on-site scope. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (610) 600-9879, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel retrofit | Starting at $7/sq ft | Includes slip sheet, new flashing, and screw-down panels over one existing shingle layer |
| Standing seam retrofit | Starting at $10/sq ft | Concealed fasteners, slip sheet, and new flashing; pitch and panel width move the price |
| Metal shingle or stone-coated steel retrofit | Starting at $11/sq ft | Slate-look or shake-look product over existing shingles; roof complexity drives the number |
| Deck repair and partial rebuild | On estimate | Soft sheathing, rot, or skip sheathing must be seen on site before pricing |
| Travel | Included | In Allentown and surrounding Lehigh Valley towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (flashing, fasteners, small reseal) | Starting at $450 | Covers small flashing corrections and fastener replacement; pitch and roof access move the price. |
| Single panel replacement | Starting at $650 | Includes matching panel, fasteners, and sealant; panel profile and color match drive cost. |
| Leak trace and seam repair | Starting at $550 | Full water-path diagnosis plus reseal; multiple prior repair attempts add time. |
| Complex or large-scale job | On estimate | Multi-panel damage or full-slope fastener failure needs an on-site look before pricing. |
| Travel | Included | In Allentown and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic and minor leak repair | Starting at $450 | Includes water test, source tracing, and a simple flashing or fastener fix on an accessible roof. |
| Seam or flashing rebuild | Starting at $850 | Covers standing seam reset or flashing rebuild at a wall, chimney, or skylight with new metal. |
| Fastener replacement pass | Starting at $650 | Pulls and replaces backed-out screws across a failed row or field, with new sealing washers. |
| Complex or large-scale job | On estimate | Needs an on-site look when multiple failure points or panel replacement are involved. |
| Emergency tarping | Starting at $350 | Priority response after a nor'easter or ice storm to stop active water intrusion. |
| Travel | Included | in Allentown and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted re-fasten (garage, shed, small barn) | Starting at $750 | Covers labor, oversized fasteners, new EPDM washers, and cleanup for a defined roof area with normal access. |
| Full-slope re-fasten (ranch, twin, colonial) | Starting at $1,450 | Price moves with roof square footage, pitch, and the number of failed fasteners found on the walk. |
| Washer-only swap | Starting at $650 | Best for sound screws with dried washers on roofs under 20 years old; priced by count and access. |
| Purlin repair and re-fasten | On estimate | Needs an on-site look because rotted purlins require carpentry before any fastener can hold. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof installation | Starting at $5.50/sq ft | Includes panels, screws, closures and standard trim; price rises with pitch, deck repair and access. |
| R-panel or 5V installation | Starting at $6.25/sq ft | Deeper rib or V-rib profile with matched closures; larger buildings and complex roofs move the number up. |
| Re-fastening and screw replacement | Starting at $450 | Includes pulling failed screws, installing neoprene-washered replacements and resetting closures; roof size drives the total. |
| Panel repair (leaks, storm damage) | On estimate | Needs an on-site look to confirm panel count, lap condition and whether the deck underneath is sound. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Slate-look metal shingles, standard gable | Starting at $9/sq ft | Installed price on a straightforward gable roof with standard trim and one layer tear-off included. |
| Shake-profile metal shingles | Starting at $10.50/sq ft | Wider embossed shake profile with wood-grain finish, priced higher due to panel size and trim work. |
| Complex roof with valleys and turrets | On estimate | Cut-up Victorian or mansard roofs with multiple valleys, chimneys and hand-fabricated flashing need an on-site measure. |
| Retrofit over one existing shingle layer | Starting at $7.50/sq ft | Lower cost when the deck is sound and code allows a second layer, no tear-off or disposal included. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard stone-coated steel installation | Starting at $9/sq ft | Includes tear-off, underlayment, panels, basic flashing, and disposal for a typical single-family roof. |
| Premium profile or concealed fastener | Starting at $12/sq ft | Includes upgraded slate or shake profile panels with hidden fasteners and a longer manufacturer warranty. |
| Complex roof or major deck repair | On estimate | Steep pitches, multiple valleys, chimney and skylight penetrations, or rotted sheathing need an on-site look first. |
| Snow guards and ice protection | Starting at $450 | Includes snow guard installation on north-facing slopes and ice-and-water shield at the eaves where needed. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (610) 600-9879, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper bay window or dormer | Starting at $20/sq ft | Includes shop-formed copper pans, soldered seams, and new flashings at the wall and chimney. |
| Zinc or terne-coated panels | Starting at $22/sq ft | Includes architectural zinc or terne-coated steel with seamed or soldered joints and custom trim. |
| Slate-look metal roof | Starting at $18/sq ft | Includes metal panels or shingles profiled to match original slate, with new underlayment and trim. |
| Full copper standing seam roof | On estimate | Large architectural roofs need an on-site look at plane count, access, and historic review before pricing. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic coating (single coat) | Starting at $2.50/sq ft | Includes wash, rust spot treatment, and one finish coat on sound panels |
| Full restoration system | Starting at $4.00/sq ft | Wash, rust converter, seam seal, primer, and two finish coats included |
| Barn and agricultural metal | Starting at $2.00/sq ft | Large flat planes lower the per-foot cost; heavy rust raises it |
| Steep or complex access | On estimate | Multi-level rowhouse roofs and tight access need an on-site look first |
| Travel | Included | In Allentown and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing rebuild | Starting at $600 | Includes removal of old step and counterflashing plus new bent metal, with access and chimney height moving the price. |
| Skylight curb flashing repair | Starting at $750 | Covers curb seal replacement and new flashing on all four sides, with roof pitch and staging adding cost. |
| Dormer, party wall, or valley flashing | Starting at $900 | Custom-bent valley or wall flashing tied into the panel field, with rotted decking and steep access raising the number. |
| Copper or specialty metal flashing | On estimate | Historic profiles and copper require an on-site look to match patina, thickness, and design review requirements. |
| Travel | Included | In Allentown and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards, single-family roof | Starting at $1,200 | Covers guards on main roof runs plus layout, sized to pitch and panel profile. |
| Snow guards plus eave ice protection | Starting at $1,850 | Adds eave membrane and edge detailing where meltwater refreezes above gutters. |
| Bar-style rail system | Starting at $2,400 | Continuous rails on steep runs above entries, driveways, and walkways. |
| Complex or large-scale roof | On estimate | Multiple levels, dormers, or tight access need an on-site look before pricing. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, no separate call-out fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage report | Free | Full roof walk, photo documentation of every damaged panel, flashing, and fastener, written repair plan included. |
| Minor repair (screws, seals, small flashing) | Starting at $350 | Re-fastening or resealing a handful of points, priced by roof access and number of penetrations involved. |
| Panel or flashing replacement | Starting at $850 | One to three panels or a chimney flashing rebuild, priced by panel profile, gauge, and height access. |
| Storm damage with deck repair | On estimate | Needs an on-site look because wet decking, underlayment, and hidden rot change the scope and material list. |
| Emergency tarp and watertight response | Starting at $450 | Same-day or next-day stabilization after a storm, priced by roof pitch, height, and urgency of the call. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, with no separate call-out or mileage fee added. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential metal roof inspection | Free estimate | Full walkover, fastener and seam check, flashing review, and written photo report included. |
| Pre-ice-season inspection | Starting at $250 | Snow load, snow guard, and ice dam risk review; price moves with roof size and pitch. |
| Post-storm / insurance documentation inspection | Starting at $350 | Wind and hail damage check with insurance-ready photos; urgency and roof access affect the rate. |
| Drone-assisted inspection (steep or tall roofs) | On estimate | We need an on-site look to confirm flight path, roof height, and image coverage before quoting. |
| Travel | Included | In Allentown and surrounding Lehigh Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless 6-inch K-style aluminum | Starting at $9/linear ft | Formed on site with heavy-duty hangers; price rises with roof height, pitch, and tight access. |
| Half-round historic profile | Starting at $14/linear ft | Bracket hangers and custom end caps for rowhouses; custom fitting on brick Victorians adds labor. |
| Oversized downspout routing | Starting at $18/linear ft | 3x4 and larger downspouts routed clear of foundations; longer runs and buried discharge raise cost. |
| Debris guard and strainer upgrade | Starting at $6/linear ft | Larger outlets and guards sized for maple and sycamore seed drop on tree-lined streets. |
| Large or complex metal roof system | On estimate | Bank barns, commercial panels, and multi-level roofs need an on-site measure before pricing. |
| Estimate | Free | Response within 24 hours at (610) 600-9879, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or shed roof repair | Free estimate | Covers inspection, fastener assessment, and a written scope before any panel is ordered. |
| Exposed-fastener panel installation | Starting at $3.50 per sq ft | Includes panels, fasteners, and basic trim; pitch and access move the number. |
| Standing seam commercial installation | Starting at $7.00 per sq ft | Concealed clips and full flashing included; roof height and penetrations raise it. |
| Retrofit over existing roof | On estimate | Framing condition and layer count need an on-site look before a number is given. |
| Travel | Included | In Allentown and surrounding Lehigh Valley towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (610) 600-9879, no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Allentown need a team that understands the Lehigh Valley's steep pitches, heavy tree cover, and high-elevation exposure. Allentown Metal Roofing is that local resource: a network of licensed, bonded, and insured contractors who install, replace, re-roof, and repair metal roofing systems across the region. From the brick rowhouses of Old Allentown to the colonials of Lower Macungie, we match the right metal system to each home's architecture and structural needs.
We serve Allentown, Bethlehem, Easton, Whitehall, Emmaus, and the surrounding communities with straight guidance and quality craftsmanship. Whether your aging screw-down roof needs attention or you're planning a full Metal Roof Installation, our team delivers durable results built for Pennsylvania weather. Call (610) 600-9879 to discuss your project.
Metal roofs are durable, but they are not maintenance-free. The most common failure we see on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that seal fails, water finds a path. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are other frequent culprits. Wind-lifted panels after a nor'easter or fallen limbs from the Valley's oaks and maples can also create sudden leaks.
Ignoring these issues is costly. Water can track along purlins and decking far from the entry point, leading to rotted sheathing and damaged insulation before you notice a ceiling stain. That is why we take an honest repair-versus-replace approach: if a full Screw Replacement & Re-Fastening can restore your roof's watertightness for a fraction of replacement cost, we will tell you so plainly.
For active leaks, our Metal Roof Leak Repair team locates the true source and fixes it properly, not just the symptom. Call (610) 600-9879 to schedule an inspection and get a clear, no-pressure assessment of your repair options.
We install a range of metal systems to suit different homes and budgets. Standing Seam Metal Roofing is our premium offering: concealed clips, no exposed fasteners, and clean lines that last. For cabins, barns, and workshops, Corrugated & Ribbed Panel Roofing offers an economical workhorse solution. We also install Metal Shingle Roofing and Stone-Coated Steel Roofing for a more traditional look, plus Copper & Specialty Metal Roofing for accents and historic homes.
Honest comparison: standing seam costs more upfront but has no exposed screws to maintain, while screw-down panels cost less and require fastener service over their lifespan. When the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate option; when it is not, a full tear-off and Metal Roof Replacement is the right call.
Metal roofing costs in Allentown are typically quoted per square foot for installations, while repairs are often flat-rate. Typical ranges vary based on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and site access. Final pricing depends on the roof and site conditions, so we encourage you to review our pricing page for general guidance and then request a free estimate tailored to your home.
Some insurance carriers may offer premium discounts for metal or impact-rated roofs, though this varies by policy and carrier. For a clear picture of your project's cost, call (610) 600-9879 to schedule a free roof inspection and written estimate.
If a storm damages your roof, we can inspect it and provide written documentation with photos that you may submit to your own insurer. Please understand that we are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document conditions honestly and let you and your insurer decide next steps.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and fees and inspection thresholds differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Allentown building or planning department before starting your project. For questions about our process, contact us anytime.
Ready to get started? Allentown Metal Roofing serves in Allentown and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Allentown · Response within 24h · No commitment · ☎ (610) 600-9879
Your Free Quote Request